Installing the Mainboard 2-11
° Installing System Memory
The mainboard provides four 168-pin DIMM sites for memory expansion.. The
DIMM socket supports 1Mx64(8MB), 2Mx64(16MB), 4Mx64(32MB),
8Mx64(64MB), 16Mx64(128MB), and 32Mx64(256MB) or double sided DIMM
modules. Minimum memory size is 8MB and maximum memory size is 512 MB
SDRAM and 1GB EDO.
There are four banks of Memory on the system board.
In order to create a memory array, certain rules must be followed. The following
set of rules allows for optimum configurations.
l The memory array is 64 or 72 bits wide. (Without parity or with parity)
l Those modules can be populated in any order.
l Support single and double density DIMMS.
The following is the valid memory configuration:
Bank Memory Module Total Memory
Bank0
(DIMM1)
8MB,16MB, 32MB,64MB,
128MB
8MB ~ 256MB
Bank1
(DIMM2)
8MB,16MB, 32MB,64MB,
128MB
8MB ~ 256MB
Bank3
(DIMM3)
8MB,16MB,
32MB,64MB, 128MB
8MB ~ 256MB
Bank4
(DIMM4)
8MB,16MB,
32MB,64MB, 128MB
8MB ~ 256MB
Total System Memory
8MB ~ 1GB
Commentaires sur ces manuels