Abit PR5 Informations techniques télécharger pdf (Page 50)

JP8: Flash ROM Type

This jumper is set at the factory for the type of Flash ROM

chip installed. You should not change the setting and it is

shown here for reference only. This jumper may be re-

placed by hardwiring directly onboard on some boards.

There are two types of Flash ROM chip, 5-Volt and 12-

Volt. The chip type has no functional effect. The settings

and location are shown below.

JP8: Flash Chip Type

This jumper is factory set for the type

of Flash Memory Chip installed. The

jumper may not be present on some

boards, with the setting hardwired

on the board instead.

Jumper JP8 Location

JP8 Flash Type

Pin 1

JP8: Flash Memory Chip Type

Pins 1-2 Pins 2-3

5-Volt Chip Short

12-Volt Chip Short

Note:

Jumper may not be present and may be hardwired instead

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 96 97

Pas de commentaire

Abit PR5 Informations techniques Page 50