Abit TX5 Guide de l'utilisateur télécharger pdf (Page 38)

4 Getting Started

Inserting the SD memory card

1. Open the SD memory card slot cover.

2. Insert the formatted SD card with the notched edge in the direction as illustrated until it clicks.

3. Confirm the direction of the memory card. If you forcibly insert the memory card in a wrong

direction, the SD card, the card slot or data on the card can be damaged.

4. Close the cover.

Ejecting the SD memory card

To remove a SD card from the scanner, open the SD card slot cover and lightly push the memory

card.

Do not eject the memory card during scanning or firmware updates.

Take care that the memory card does not pop out and drop.

Powering the laser scanner

The laser scanner can be operated with the battery and the external power supply unit.

Supplying power with the battery

Adhere to the battery safety measures (see PowerBlock battery safety, page 14) and mount a

charged battery into the laser scanner:

1. Open the scanner's battery compartment cover.

Turn the battery so that its type label is directed upwards, point the battery contacts to the

scanner, push the battery straight in, and slide it downward into the battery compartment

until the fastener clicks into position.

Trimble TX5 3D Laser Scanner User Guide 38

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 124 125

Pas de commentaire

Abit TX5 Guide de l'utilisateur Page 38